Thông tin: Trình duyệt của bạn không chấp nhận cookies. Để cho sản phẩm vào giỏ hàng và mua chúng, bạn cần phải kích hoạt cookies của trình duyệt.
BULONG HỆ INCHESBULONG LẮP Ổ BI
BULONG INOX 316 - 304
Xem ảnh lớn

BULONG INOX 316 - 304


  • Thông tin chi tiết
  • Nhận xét của khách hàng

BULONG INOX 316 - 304

IWISU CHUYÊN NHẬP KHẨU VÀ PHÂN PHỐI CÁC LOẠI BULONG INOX 304 VÀ INOX 316 TẠI THỊ TRƯỜNG VIỆT NAM

ĐẶC BIỆT CHÚNG TÔI CÓ CUNG CẤP CÁC SIZE CHO BULONG INOX 316 HỆ INCHES

- BULONG INOX 201, 304, 316 | BULONG IWISU|BULONG HỆ INCHES

 

Head Markings - Inch Standards

 

All bolt heads will be marked with a manufacturers stamp and the following grade markings:

 

  • Grade 2No Grade Markings Head Markings - Inch Standards
  • Grade 53 Radial Lines 120 degrees apart Head Markings - Inch Standards
  • Grade 86 Radial Lines 60 degrees apart Head Markings - Inch Standards

 

Head Markings - Metric Standards

 

All bolt heads will be marked with a manufacturers stamp and the following grade markings:

 

The Property Class shall be marked as appropriate.

 

Property Classes: 4.6, 4.8, 5.8, 8.8, 9.8, 10.9

Head Markings - Inch StandardsHead Markings - Inch Standards

Finishes

 

Unless otherwise specified all Hex Cap Screw will be furnished plain (black - no finish)

 

Other finishes available include: Zinc Plating, Hot Dip Galvanized, Mechanical Galvanized, Black Oxide, PTFE (Xylan)

 

 

 

alt

 

Tiêu chuẩn:

DIN 931 Part Thread Hexagon Head Screws

DIN 933 Full Thread Hexagon Head Screws

ISO 4017 Full Thread Hexagon Head Screws

Đường kính: M4-40 mm

Chiều dài: 10-450mm

Bước ren: 1-4, UNC, UNF

 

 

Xuất xứ: Singapore, Korea, Đài Loan...

VẬT LIỆU: SS316, SS304

 

 

 

 
alt

 

Đường kính: 4-40 mm

Chiều dài: 10-450mm

Bước ren: 1-4, UNC, UNF

Xuất xứ: Singapore, Korea, Đài Loan...

TIÊU CHUẨN

ASTM A574 - Standard Specification for Alloy Steel Socket-Head Cap Screws

ANSI B18.3 - Socket Head Cap Screw

ASTM F912 - Standard Specification for Alloy Steel Socket Set Screws

ASME B1.13M - Metric Screw Threads

DIN912 - 12.9 Hexagon Socket Head Cap Screws

DIN 916 - Socket Set Screws Cup Poin

 

 

etric Standards

SAE J1199 Mechanical and Material Requirements for Metric Externally Threaded Fasteners

ASME B18.2.3.1M Metric Hex Cap Screws - This Standard covers the complete general and dimensional data for metric series hex cap screws recognized as American National Standard.

DIN 931 Part Thread Hexagon Head Screws

DIN 933 Full Thread Hexagon Head Screws

ISO 4017 Full Thread Hexagon Head Screws

Head Markings - Inch Standards

All bolt heads will be marked with a manufacturers stamp and the following grade markings:

  • Grade 2No Grade Markings Head Markings - Inch Standards
  • Grade 53 Radial Lines 120 degrees apart Head Markings - Inch Standards
  • Grade 86 Radial Lines 60 degrees apart Head Markings - Inch Standards

Head Markings - Metric Standards

All bolt heads will be marked with a manufacturers stamp and the following grade markings:

The Property Class shall be marked as appropriate.

Property Classes: 4.6, 4.8, 5.8, 8.8, 9.8, 10.9

Head Markings - Inch StandardsHead Markings - Inch Standards

Finishes

Unless otherwise specified all Hex Cap Screw will be furnished plain (black - no finish)

Other finishes available include: Zinc Plating, Hot Dip Galvanized, Mechanical Galvanized, Black Oxide, PTFE (Xylan)

Cap Screws Threaded Inch & Metric

Cap Screw Thread Inch & Metric

Inch Size
Coarse(UNC)
Fine(UNF)
Decimal
Equivalent
Closest
Metric Size
Decimal
Conversion
1/4-20
.250
M6 X 1.0
.236"
1/4-28
.250
M6 X .075
.236
5/16-18
.3125
M8 X 1.25
.315
5/16-24
.3125
M8 X 1.0
.315
3/8-16
.375
M10 X 1.5
.394
3/8-24
.375
M10 X 1.25
.394
7/16-14
.4375
7/16-20
.4375
1/2-13
.500
M12 X 1.75
.472
1/2-20
.500
M12 X 1.25
.472
9/16-12
.5625
M14 X 2.0
.551
9/16-18
.5625
M14 X 1.5
.551
5/8-11
.625
M16 X 2.0
.630
5/8-18
.625
M16 X 1.5
.630
3/4-10
.750
M20 X 2.5
.787
3/4-16
.750
M20 X 1.5
.787
7/8-9
.875
M22 X 2.5
.866
7/8-14
.875
M22 X 1.5
.866
1-8
1.00
M24 X 3.0
.945
1-12
1.00
M24 X 2.0
.945
1-14
1.00
1 1/8-7
1.125
1 1/8-12
1.125
1 1/4-7
1.25
M30 X3.5
1.181
1 1/4-12
1.25
M30 X 2.0
1.181

Standard & Metric Thread Length for Hex Head Cap Screws

Inch Fasteners

Dia
Lengths
Threaded to the
Head
Lengths
with Partial
Threads
Min. & Max
Thread Lengths
Lengths Up To
Lengths
Min.-Max.
1/4
1 1/8
1-1/4 to 6
3/4 - 1.0
5/16
1 1/4
1-5/16 to 6
7/8 - 1.153
3/8
1 3/8
1-1/2 to 6
1 - 1.312
7/16
1 5/8
1-3/4 to 6
1 1/8 - 1.482
1/2
1 3/4
1-7/8 to 6
1 1/4 - 1.635
9/16
2
2-1/8 to 6
1 3/8 - 1.792
5/8
2 1/8
2-1/4 to 6
1 1/2 - 1.955
3/4
2 1/2
2-5/8 to 6
1 3/4 - 2.250
7/8
2 3/4
2-7/8 to 6
2 - 2.556
1
3
3-1/8 to 6
2 1/4 - 2.875
1 1/8
3 1/2
3-5/8 to 6
2 1/8 - 3.214
1 1/4
3 3/4
3-7/8 to 6
2 3/4 - 3.464
1 3/8
4 1/4
4-5/16 to 6
3 - 3.833
1 1/2
4 1/2
4-5/8 to 6
3 1/4 - 4.083
1 3/4
5 1/2
5-1/4 to 6
3 3/4 - 4.75
2
5 3/4
5-7/8 to 6
4 1/4 - 5.361
2 1/4
6 1/2
6-5/8 to 12
5 - 5.861
2 1/2
7 1/8
7-1/8 to 12
5 1/2 - 6.5

Metric Fasteners

Bolt
Diameter
(mm)
Bolts
125mm
and
Shorter
Bolts
Longer
Than
125mm
3
12
-
4
14
-
5
16
22
6
18
24
7
20
26
8
22
28
10
26
32
12
30
36
14
34
40
16
38
44
18
42
48
20
46
52

Inch Size Bolt Head/Wrench Size

Bolt
Diameter
Hex Bolt Lag
Bolt Square
Bolt
Heavy Hex
Bolts
#6
1/4
#8
1/4
#10
5/16
#12
5/16
1/4
7/16 or 3/8
5/16
1/2
3/8
9/16
7/16
5/8
1/2
3/4
7/8
9/16
13/16
5/8
15/16
1 /16
3/4
1 1/8
1 1/4
7/8
1 5/16
1 7/16
1
1 1/2
1 5/8
1 1/8
1 11/16
1 3/4
1 1/4
1 7/8
2

Metric Size Bolt Head/Wrench Size

Bolt
Diameter
(mm)
ANSI/ISO
DIN
DIN/ISO
Heavy
Hex
4
7
7
5
8
8
6
10
10
7
11
8
13
13
10
16
17
12
18
19
22/21
14
21
22
16
24
24
27
18
27
20
30
30
34/32

US Tap and Drill Bit Size

Tap
Drill Bit Size
(Optional
Letter/
Number)
0-80
3/64
1-64
53
2-56
50
3-48
47
4-40
3/32
5-40
38
6-32
7/64 (35)
8-32
29
10-24
5/32 (25)
10-32
5/32 (21)
12-24
11/64 (16)
1/4-20
13/64 (7)
1/4-28
7/32 (3)
5/16-18
17/64 (F)
5-16-24
I
3/8-16
5/16
3/8-24
21/64 (Q)
7/16-14
23/64 (U)
7/16-20
25/64
1/2-13
27/64
1/2-20
29/64
9/16-12
31/64
9/16-18
33/64
5/8-11
17/32
5/8-18
37/64
3/4-10
21/32
3/4-16
11/16

Metric Tap and Drill Bit Size

Tap
Drill Bit Size
(Optional
Fractional)
3mm x 0.50
2.5 mm
4 x 0.70
3.4
5 x 0.80
4.3
6 x 1.00
5.2
7 x 1.00
6.1 (15/64)
8 x 1.25
6.9 (17/64)
8 x 1.00
7.1
10 x 1.50
8.7
10 x 1.25
8.9 (11/32)
10 x 1.00
9.1
12 x 1.75
10.5
12 x 1.50
10.7 (27/64)
14 x 2.00
12.2
14 x 1.50
12.7
16 x 2.00
14.2 (35/64)
16 x 1.50
14.7

Inch Cap Screw strength

Inch Grade
Tensile
Strength (Min)
Yield
Strength, min,
(psi)
Full Size
Proofload,
(psi)
Material
Treatment
Grade 2
Carbon Steel
None
1/4 thru 3/4
74,000
57,000
55,000
>3/4 thru 1 1/2
60,000
36,000
33,000
Grade 5
Carbon Steel
Quenched & Tempered
1/4 thru 1
120,000
92,000
85,000
>1 thru 1 1/2
105,000
81,000
74,000
Grade 8
Alloy Steel
Quenched & Tempered
1/4 thru 1 1/2
150,000
130,000
120,000

Metric Cap Screw strength

Metric Grade
Tensile
Strength
(Mpa) (Min)
Yield
strength, min,
(Mpa)
Full Size
Proofload,
(Mpa)
Material
Treatment
Class 8.8 < 16mm
800
640
580
Carbon Steel
Quenched & Tempered
Class 8.8 > 16mm
830
660
600
Class 10.9
1040
940
830
Alloy Steel
Quenched & Tempered
Classs 12.9
1220
1100
970
Alloy Steel
Quenched & Tempered
Nominal
Diameter Of
Thread d(mm)		 Pitch Nominal Stress Area Property Class
P(mm) As(mm2) 4.6 8.8 10.9 12.9
    Proof Load (As . Ap),N
3 0.5 5.03 1130 2920 4180 4880
3.5 0.6 6.78 1530 3940 5630 6580
4 0.7 8.78 1980 5100 7290 8520
5 0.8 14.2 3200 8230 11800 13800
6 1 20.1 4520 11600 16700 19500
7 1 28.9 6500 16800 24000 28000
8 1.25 36.6 8240 21200 30400 35500
10 1.5 58 13000 33700 48100 56300
12 1.75 84.3 19000 489001) 70000 81800
14 2 115 25900 667001) 95500 112000
16 2 157 35300 910001) 130000 152000
18 2.5 192 43200 11500 159000 186000
20 2.5 245 55100 147000 203000 238000
22 2.5 303 68200 182000 252000 294000
24 3 353 79400 212000 293000 342000
27 3 459 103000 275000 381000 445000
30 3.5 561 126000 337000 466000 544000
33 3.5 694 156000 416000 570000 673000
36 4 817 184000 490000 678000 792000
39 4 976 220000 586000   947000

Tensile Strength

Tensile Strength: The maximum load in tension (pulling apart) which a material can withstand before breaking or fracturing.

Yield Strength: The load at which a material exhibits a specific permanent deformation.

Proof Load: An axial tensile load which the product must withstand without evidence of any permanent set.

1MPa = 1N/mm2 = 145 pounds/inch2

Suggested Torque Values & Clamp Loads

Torque Values for grades 2, 5, 8, and 9 Bolts - Coarse Thread

    SAE Gr. 2   SAE Gr. 5   SAE Gr. 8   Grade 9  
Nominal Size & tpi Tensile Stress Area (sq in) Clamp Load (lb) Tightening Torque (in-oz) Clamp Load (lb) Tightening Torque (in-oz) Clamp Load (lb) Tightening Torque (in-oz) Clamp Load (lb) Tightening Torque (in-oz)
1/4-20 0.0318 859 37 (in-lbs) 2029 86 (in-lbs) 2864 122 (in-lbs) 3357 143 (in-lbs)
5/16-18 0.0524 1416 75 3342 178 4719 251 5531 294
3/8-16 0.0775 2092 11 (ft-lbs) 4940 26 (ft-lbs) 6974 37 (ft-lbs) 8174 43 (ft-lbs)
7/16-14 0.14063 2870 18 6777 42 9568 59 11214 70
1/2-13 0.1419 3831 27 9046 64 12771 90 14969 106
9/16-12 0.1819 4912 39 11599 92 16375 130 19193 153
5/8-11 0.226 6102 54 14408 128 20340 180 23840 211
3/4-10 0.3345 9030 96 21322 227 30101 320 35281 375
7/8-9 0.4617 12467 155 29436 365 41556 515 48707 604
1-8 0.6057 16355 232 38616 547 54517 772 63899 905
1 1/4-7 0.9691 26166 463 53786 952 87220 1545 102229 1810
1 1/2-6 1.4053 37942 806 77991 1657 126473 2688 148237 3150

All material in these charts are theoretical only. Use by anyone in an actual application is voluntary.

Torque Values are calculated from the formula - T = KDF, where

K = 0.17 for zinc plated, dry conditions
D = Nominal Diameter
F = Clamp Load

Clamp load calculated as 75% of the proof load when specified by the standard.

Torque Values for grades 2, 5, 8, and 9 Bolts - Fine Thread

    SAE Gr. 2   SAE Gr. 5   SAE Gr. 8   Grade 9  
Nominal Size & tpi Tensile Stress Area (sq in) Clamp Load (lb) Tightening Torque Clamp Load (lb) Tightening Torque Clamp Load (lb) Tightening Torque Clamp Load (lb) Tightening Torque
1/4-28 0.0364 982 42 (in-lbs) 2319 99 (in-lbs) 3274 139 (in-lbs) 3837 163 (in-lbs)
5/16-24 0.0581 1568 83 3702 197 5226 278 6125 325
3/8-24 0.0878 2371 13 (ft-lbs) 5599 30 (ft-lbs) 7905 42 (ft-lbs) 9265 49 (ft-lbs)
7/16-20 0.1187 3205 20 7568 47 10684 66 12523 78
1/2-20 0.16 4319 31 10197 72 14396 102 16873 120
9/16-18 0.203 5480 44 12940 103 18268 146 21412 171
5/8-18 0.256 6911 61 16317 144 23036 204 27000 239
3/4-16 0.373 10070 107 23776 253 33566 357 39343 418
7/8-14 0.5095 13756 171 32479 403 45853 568 53743 666
1-14 0.6799 18357 260 43343 614 61190 867 71720 1016
1 1/4-12 1.0729 28970 513 59548 1055 96565 1710 113182 2004
1 1/2-12 1.581 37942 907 87747 1865 142292 3024 166778 3544

All material in these charts are theoretical only. Use by anyone in an actual application is voluntary.

Torque Valuses are calculated from the formula - T = KDF, where

K = 0.17 for zinc plated, dry conditions
D = Nominal Diameter
F = Clamp Load

Clamp load calculated as 75% of the proof load when specified by the standard.

Torque Values for Metric Bolts - Coarse Thread

Class 4.6
Class 8.8
Class 10.9
Nominal
Size &
Pitch
Tensile
Stress Area
(mm^2)
Clamp
Load
(lbs)
Tighten-
ing
Torque
(ft-lbs)
Clamp
Load
(lbs)
Tighten-
ing
Torque
(ft-lbs)
Clamp
Load
(lbs)
Tighten-
ing
Torque
(ft-lbs)
4-0.70
8.78
333
0.7
858
1.9
1228
2.7
5-0.80
14.2
538
1.5
1387
3.9
1985
5.5
6-1.00
20.1
763
2.6
1968
6.6
2816
9.4
8-1.25
36.6
1389
6.2
3580
16
5123
22.9
10-1.5
58
2200
12.3
5671
31.6
8115
45.2
12-1.75
84.3
3197
21.4
8240
55.1
11792
78.9
14-2.00
115
4379
34.2
11289
88.1
16154
126.1
16-2.00
157
5943
53
15320
137
21924
196
18-2.50
193
7301
73
18822
189
26934
270
20-2.50
245
9286
104
23938
267
34256
382
22-2.50
304
11509
141
296969
364
42457
521
24-3.00
353
13372
179
34471
461
49329
660
27-3.00
459
17428
262
44924
676
64288
968
30-3.50
561
21266
356
54819
917
78448
1312
33-3.50
694
26310
484
67821
1248
97055
1786
36-4.00
817
30982
622
79866
1603
114291
2294

Add comment

Security code
Refresh

Sản Phẩm

BOLT AND NUT | BU LÔNG ĐAI ỐC VALVES | VAN PIPE FITTING | PHỤ KIỆN ĐƯỜNG ỐNG INOX CÔNG NGHIỆP INOX VI SINH ỐNG HƠI, ỐNG THỦY LỰC PRESSURE GAUGE AND THERMOMETER | DONG HO DO NHIET DO VA AP SUAT PUMP | BƠM CÔNG NGHIỆP SAFETY GLOVES | BAO TAY BẢO HỘ ĐÁ MÀI ĐÁ CẮT MURRPLASTIK PRODUCTS THIẾT BỊ NGÀNH HÀN ARMSTRONG THIẾT BỊ AN TOÀN PORTWEST PRODUCTS

Hổ trợ

Hỗ trợ Kinh doanh:

sales@iwisu.com hoặc info@iwisu.com

Mr Đô: 0908.601.662
Mail: ledo@iwisu.com

Mr Hòa: 0908.217.288
Mail: truongphuchoa@iwisu.com

Ms. Dung : 0906. 286. 287
Mail: trandung@iwisu.com

Ms. Tuyền : 0937.70.80.86
Mail: kinhdoanh02@iwisu.com

Ms. Minh : 0942.177. 470
Mail: kinhdoanh01@iwisu.com

Thống kê

mod_vvisit_counterHôm nay36
mod_vvisit_counterHôm qua111
mod_vvisit_counterTổng cộng208315
Online (20 minutes ago): 6