Thông tin: Trình duyệt của bạn không chấp nhận cookies. Để cho sản phẩm vào giỏ hàng và mua chúng, bạn cần phải kích hoạt cookies của trình duyệt.

Threaded Pipe Fitting

  • Thông tin chi tiết
  • Nhận xét của khách hàng

Threaded Pipe Fitting | Nối Ren Áp Lực Cao

Fittings for Threaded Pipe systems

Threaded Elbow 90 degrees

Elbow 90°
This Elbows make 90° changes of direction in the run of pipe.

Co ren 90 độ áp lực cao

Threaded Tee

This Tee makes 90° branch from the main run of pipe.

Tê ren áp lực cao

Threaded Cross

Crosses makes 90° branch from the main run of pipe.

Chữ thập áp lực cao

Threaded Elbow 45 degrees

Elbow 45°
This Elbows make 45° changes of direction in the run of pipe.

Co ren 45 độ áp lực cao

Threaded Full Coupling

A Full Coupling, joins pipe two pipe or to a nipple etc..

Măng xông ren áp lực cao

Threaded Cap (End Cap)

Cap (End Cap)
Seals the threaded end of pipe.

Đầu bịt ren trong áp lực cao

Threaded Half Coupling Half-coupling
The Half Coupling can be directly welded to the run pipe, to make a branch connection.
Threaded Square Head Plug

Square head plug
Seals the threaded end of fitting.

Đầu bịt ren ngoài áp lực cao

Threaded Hex Head Plug Hex head plug
Seals the threaded end of fitting.
Threaded Round Head Plug Round head plug
Seals the threaded end of fitting.
Threaded Hex head bushing

Hex head bushing
Can be used to reduce a threaded fitting.

Cà rá ren áp lực cao

Threaded Union

Union (MSS SP-83)
Unions are primarily used for maintenance and installation purposes. It is a screwed joint design and it consists of three interconnected pieces. Two internally threads and a centerpiece that draws the ends together when rotated.

Rắc co ren áp lực cao

Definition and Details of Threaded Fittings ASME B16.11

Threaded Fittings general

Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
The dimensional standards for taper pipe threads are given in ASME B1.20.1. That document gives all required dimensions including number of threads per inch, pitch diameter, and normal engagement lengths for all pipe diameters.

  • Threaded piping is commonly used in low-cost, noncritical applications such as domestic water, fire protection, and industrial cooling water systems.
  • Threaded fittings are normally made of cast gray or malleable iron, cast brass or bronze, or forged alloy and carbon steel.
  • They are available in three pressure ratings: Class 2000, 3000 and 6000.

NPT Thread

All fittings on this page are described, are provided with NPT thread, ASME B1.20.1. The American National Pipe Thread Tapered, is the best known and most widely used connection where the pipe thread provides both the mechanical joint and the hydraulic seal. NPT has a tapered male and female thread which seals with Teflon® tape or jointing compound.

Dimensions of American Taper Pipe Thread, with Sealant Compound

DN-NPT Major Diameter
Drill Size mm
TPI Pitch
1/16" 7.895 6.00 27 0.941
1/8" 10.242 8.25 27 0.941
1/4" 13.616 10.70 18 1.411
3/8" 17.055 14.10 18 1.411
1/2" 21.223 17.40 14 1.814
3/4" 26.568 22.60 14 1.814
1" 33.228 28.50 11.5 2.209
1.1/4" 41.985 37.00 11.5 2.209
1.1/2" 48.054 43.50 11.5 2.209
2" 60.092 55.00 11.5 2.209
2.1/2" 72.699 65.50 8 3.175
3" 88.608 81.50 8 3.175
3.1/2" 101.316 94.30 8 3.175
4" 113.973 107.00 8 3.175
5" 141.300 134.384 8 3.175
6" 168.275 161.191 8 3.175
8" 219.075 211.673 8 3.175
10" 273.050 265.311 8 3.175
12" 323.850 315.793 8 3.175
NPT Thread

Types of Threaded Fittings by Class and Size

Description Class Designation
2000 3000 6000
Elbows 45 and 90 degrees
Tees, Crosses, Coupling
Half-Coupling, Cap
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Wall SCH 80 and XS SCH 160 XXS

Plugs and Bushings are not identified. They may be used up through Class 6000 NPS

Advantages and Disadvantages of Threaded Fittings


  • Installation productivity is moderately high, and specialized installation skill requirements are not extensive.
  • Leakage integrity is good for low-pressure, low-temperature installations where vibration is not encountered.


  • Rapid temperature changes may lead to leaks due to differential thermal expansion between the pipe and fittings.
  • Vibration can result in fatigue failures of screwed pipe joints due to the high stress intensification effects caused by the sharp notches at the base of the threads.
  • In hazardous piping systems threaded connections should be avoided, if possible. Their vulnerability to fatigue damage is significant, especially where exposed threads are subject to corrosion.

Add comment

Security code

Hổ trợ hotline

Hỗ trợ Kinh doanh: hoặc

Mr Đô: 0948.247.247

Mr Hòa: 0908.217.288

Mr Đông: 0936.238.438

Mr Lợi: 0985.149.282

Ms. Minh : 0942.177. 470

Ms. LyNa: 0935.802.439

Mr. Vũ: 0939.184.960


Mr. Biên: 0909.895.853



mod_vvisit_counterHôm nay156
mod_vvisit_counterHôm qua167
mod_vvisit_counterTổng cộng302027

Online (20 minutes ago): 3